Fix It Wrap Strong Fiber Weld Fix Repair Tape and Heat Exhaust Wrap|2 INCH X 60 in| 2-PACK


Price:
Sale price$8.99

Description

2 INCH FixIt Wrap Incredibly Strong Fiber Fix Fiber Weld Fiberglass Repair Tape | Heat Resistant up to 1100°F | Compare to FiberWeld 2-PACK 

You get 2 full rolls of Fix it wrap just like FiberFix.
Compare to Fiber Fix! At a much lower price! A Better fix than Duct Tape Repairs!
Fix It Wrap is fiberglass tape with a high resin content impregnated onto a very strong high-weave fiberglass cloth. Think of it in terms of thread count. Fix It Wrap has a higher thread count creating a much stronger tape. Add strong resin and you have steel-like repair tape. Perfect for the repair of just about anything. It holds better, seals better, and sticks better than traditional fiberglass tape.
Getting frustrated with cheap products that break easily. Why buy new when you can fix it with Fix It Wrap? This unique product can fix almost anything. It uses the properties of fiberglass tape mixed with high-bonding resin to create a steel-like repair. Give it a try. It's a must-have for any repair shop, hunting lodge, fishing trip, doomsday prepper kit, and many more repair situations. You will find a similar brand on the market called FiberFix which is more expensive, ours is of high quality at a much lower price.



Fix-It Wrap Strong Fiberglass Repair tape. Compare to FiberFix at a lower cost to you. 100x Stronger Than Duct Tape

 

Size options:

2 INCH (50mm) x 50"

Frequent Question: Can I just use regular casting tape and do the same thing?

You can use regular casting tape for repair or hobby work. But Fix It wrap was designed better and stronger. Our fiberglass tape has a higher resin (polyurethane) content. So that allows it to stick better to things such as plastics. It also has a higher weave or tread count. So that makes the fiber tape much stronger. Normal cast tape can be torn easily when it is still wet and also when it is dry. Whereas Fix It wrap is very strong from to start and at the finish. There are many people out there who just use regular casting tape for hobby use. But if you need something to adhere better and to be stronger. Give the Fix It Wrap a try. We guarantee you will be happy with it!Broken?


Item breaks at the most inconvenient times. Don't replace it, FixIt Wrap it!
Wet thoroughly
FixIt Wrap is water-activated. Simply submerge the roll of FixIt Wrap and remove excess water.
Wrap tightly
Wrap directly over the break and DiamondWrap will start to harden.
Go back to work

After 10 minutes FixIt Wrap hardens like steel. You'll be back to work in no time.
Can withstand temperatures from -40 Degrees Fahrenheit up to 1100°F


FiberFix is a registered trademark of the FiberFix company and is not affiliated with this product or company.100% Satisfaction guarantee. If for any reason the product fails you. We just require that you provide photographic proof of failure. Please do not throw away the product. Simply snap a photo of the issue and we will either replace or refund you for any issues.

Never apply fiberglass cast tape directly to the skin.

You may also like

Recently viewed

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tom G
Same as the FiberFix I used to get.

I used this product before when it was Fiberfix now called JBweld FiberWeld. Fix it wrap was just as good if not better. I even used it as a heat wrap for my tail pipe.
Much better deal as you get 2 inside the box vs. how the other brands only give you one in the box. Happy I found this product

N
Nathan DeWitt
Handyman

I used four rolls (one on each corner) to fix a steel fence, that basically needed welded. Checked it the next day, seems to be very strong. Im very happy with the results.