Use this bar to show information about your cookie policy.
Roll over image to zoom inClick on image to zoom
/
Description
Authentic Stryker 940-35 Titanium Ion Cast Cutter Saw Blade. This blade is specifically designed for use with the Stryker 940 cast cutter saw.
The Stryker 940-35 distinctive gold color reveals its Titanium Ion coating. Titanium (Ti) Nitride coating provides additional hardness to the cutting teeth and blade surface providing greater blade life and prolonged tooth sharpness. The titanium creates a lubrication process that reduces friction and prevents heat build-up at the blade/cast interface. The result is a blade that remains cooler during lengthy procedures, e.g., long-leg cast removal.
Stryker Update:
Stryker recently shut down all their cast saw support here in the USA leaving everyone to scramble for accessories and support. We contacted Stryker to find out if we could still get cast saw blades for our customers. Since Stryker products are sold globally, they provided us with 2 sources that still produce blades for Stryker and got them to ship to the USA.
Types of coatings often seen on cast saw blades. In order of strength. # 1 is the strongest blade coating.
#1 Dichronite blade (coated) Another very effective blade coating is Tungsten Disulfide, or “Dichronite”. It is dry film lubrication applied to stainless steel blades under high air pressure. The steel blade “accepts” the coating as it bonds exceedingly well, causing a very lubricious surface when the treatment is complete. Other extremely hard compounds and elements such as Boron have also been used in this manner with much success. These types of coatings afford users lower-cost performance attributes such as extended blade life and cooler cutting temperatures.
#2 Ion Nitriding (coated) Currently, the most effective process available for maximizing cast saw blade life is Ion Nitriding. This “high-tech” process, also known as “plasma coating”, uses electron bombardment of nitrogen ions to form an incredibly strong, yet smooth surface to a base steel cutter blade. The process takes place in a vacuum vessel under a very high-voltage charged environment. The effect on the blade surface is a hardness factor nearly that of diamonds; and a very smooth surface that has very little drag coefficient.
#3 Titanium Nitrided blade (coated) Titanium nitride is a gold “ceramic” coating that is applied to a stainless steel base blade. Once applied, the blade surface becomes exponentially harder, and the drag coefficient is dramatically lessened. This results in much cooler surface temperatures during actual cutting, and longer saw tooth sharpness. Titanium coating adds a thin layer that protects the teeth, maintaining their effectiveness for a longer timeframe.
#4 PTFE (Teflon coated) Teflon is a very lubricious, slippery coating which is applied to the stainless-steel blade. The process is much like spray painting and takes place at room temperature. When dry, and cured, the Teflon provides a non-stick, low drag coefficient surface that slides smoothly through casting materials. The drawback is that Teflon tends to wear off not long after first use. So, despite the low friction surface, the material often fails to stay permanently bonded, so some degradation is seen. Despite this small downside, PTFE-coated blades remain quite popular.
#5 Stainless Steel (not coated) Stainless Steel blades are not coated. They are, however, made of high carbon stainless alloy, which is “tempered” using a high-temperature hardening process that makes the steel much harder; therefore makes its teeth last longer during the cutting process. As the blade is used, the teeth gradually lose their sharpness over time. This results in a longer cutting time, and heat due to increased friction will be the result. A dull blade will produce so much heat that it may be felt by the patient even though the cast padding. A normal general orthopedic practice that removes 10 casts per week can expect a single stainless steel blade to last a month or two before needing to be changed.
The blade has been our go to for years. It is very durable and dependable. Will continue to use them as long as they are available.
H
Harris Gellman
great company
fast delivery
excellent service
K
Kristen Olsen
Cast Blade
Thank you for carrying these specific cast saw blades, they are becoming harder and harder to find so I appreciate I was able to order with ease and they arrived within the week and I was kept up to speed on tracking!
It’s really like wearing a high top tennis shoe.
Walking in it is a breeze, I actually enjoy wearing it because it really relieves the pain of my broken foot.
As I am not equipped to assemble the brace it is presently of no use. I will be looking to find someone with the expertise to assemble the brace.
Thank you for sharing. Our Afo Light and Afo Dynamic are industry leaders in this style of bracing. Depending on the patient indication and secondary conditions it would be better for you to visit an Orthopedic & Prosthetic (O&P) clinic where a clinician can formally contour and mold the brace. The Afo light is malleable but should be modified under the supervision of a clinic. If there is mild to moderate drop foot, this product could be a viable option out of the box.
So in your case, you should really work with your O&P to have this brace fitted correctly. This way the brace will work properly for you.
