Use this bar to show information about your cookie policy.
Roll over image to zoom inClick on image to zoom
/
Description
The smallest of patients can benefit from Exos® technology. The ability to heat form and custom fit helps to ensure proper uniform support and comfortable fit. Exos braces are radiolucent and do not need to be removed for x-ray imaging. Provides support and protection for major injuries to the wrist. Ideal for fractures to the distal radius or distal ulna, and can be employed for acute injuries as well as post-operatively. Not made with natural rubber latex.
The BOA Fit System is a dial-based performance fit system that is engineered with high-quality, durable materials that enable a micro-adjustable connection that is built to perform. Each unique configuration is engineered for power without compromising precision to deliver a seamless connection between equipment and body.
Wrap the tape loosely around your hand to measure your size and compare it to the chart below. Upsizing is recommended if you measure between sizes or prefer a loose or roomy fit. This item is often returned for being too small. It's better to go with the bigger size as it can be molded to fit.
LENGTH IS THE ACTUAL LENGTH OF THE BRACE
INDICATIONS:
Distal Radius (Non-Displaced, Plated or Stable)
Colles’ Fracture / Smith’s Fracture
Scapholunate Ligament Injury (SLL)
Salter-Harris Fractures
Hutchinson (Chauffeur)
Carpal Bone Injuries
Stable Wrist Fractures
Stable Distal Radius / Distal Styloid Fractures
Radial-Carpal Ligament Injuries
Triangular Fibro-Cartilage Complex (TFCC) Tears
CONTRAINDICATIONS:
Not for use on patients with known allergies to foams, adhesives, or plastic products
FEATURES AND BENEFITS:
The ability to thermoform and custom fit the Brace to the patient's extremity ensures a comfortable fit.
A contact closure release tab has been added to allow the brace to open more fully for easier application.
Ulnar styloid relief holes help reduce pressure on the bony prominence.
The micro-adjustable BOA® Fit System allows for a fast, effortless, precision fit through a customizable and seamless level of support.
PRECAUTIONS:
Brace should be fitted by a qualified healthcare professional
Do not heat the brace while it is on the body
Ensure the brace is not too hot before applying
The brace should be sized to the patient for proper support and function
Take care with delicate or compromised skin to not apply the brace too tightly
Instruct patients on proper tension and undersleeves to avoid friction and shear
Do not heat to greater than 100 degrees Celsius
Please read this important statement regarding the purchase and returns of all Exos Bracing Items: By purchasing an Exos brace or any of its accessories, you acknowledge that you are either a qualified orthopedic technician or currently under the supervision of an orthopedic medical provider who has prescribed an Exos product directly to you. It is paramount that you read and carefully follow the manufacturer's directions provided with the unit. The end-user will assume all responsibility for the use or misuse of the item purchased. Furthermore, you acknowledge that OrthoTape.com is only a distributor of the product and in no way takes responsibility for any injury it may cause due to malfunction, misuse, inappropriate application, or other reasons. By clicking "Add to Cart" you acknowledge the above statement(s) to be true and accurate.
HEATING AND APPLICATION
Open and unfold the brace. (Figure 4)
Proper heating temperature is 200°F (93°C).
Heat the brace in Exos™ oven for approximately 3-4 minutes or until the brace is pliable. The brace should not be too hot to handle comfortably.
Ensure that skin is completely dry before application. ? Fit brace on the patient. (Figure 5)
Remove slack in lace by tightening Boa® Knob. Caution: Do not tighten the brace fully until the brace has returned to room temperature otherwise indentations in plastic may occur.
Mold brace into the desired position. (Figure 6)
Hook-and-loop fastener strap may be secured in the desired position.
Once the brace has hardened, the Boa® Knob may be tightened to desired tension.
Warning: The brace should not be worn too tightly. This may produce excessive mechanical force or shear forces to the skin. For fitting tips on each Exos™ device: Visit the Exos™ Provider Center at: http://exosmedical.com/provider/WBwBoa or Scan the QR image with your smartphone LIMITED PRODUCT WARRANTY Exos™ covers defects in workmanship and materials up to 8 weeks from date this product is dispensed. Damage caused by normal wear and tear, abuse, or alterations is not covered.
FAQ's
What is EXOS Bracing?
Exos is a revolutionary, thermoformable technology, offering an adjustable and re-formable solution for the wrist. The Exos advanced technology allows you to mold the brace for the best possible fit for maximum comfort and stabilization. The thermoformable material is lightweight, waterproof, and can be easily cleaned.
What is the Exos Short Arm Brace with BOA?
The BOA reel and lace closure system offers adjustability over the whole of the brace at the same time. When twisting the BOA reel the lacing will evenly tighten and tension to create a custom fit to your wrist shape. This also allows expansion for initial swelling to reduce the risk of compartment swelling when other bracing or casts can cause restriction. The brace can be fully removed (or not with the BOA locking system) to allow for daily wearing, examination of the joint, or initiation of rehabilitation and exercises.
When do I need an Exos Short Arm Brace with BOA?
The Exos short arm Brace can be used primarily for non-displaced fractures to the distal radius or distal ulna and for minor injuries as well as for post-operative support as well as cartilage tears in the wrist, radio-carpal ligament injuries, wrist sprains, or strains where restriction of movement is required in arthritis, carpal tunnel and repetitive strain injury (RSI).
When can I wear my Exos Short Arm Brace with BOA?
It's waterproof so can be worn in the shower or bath, can be used in the swimming pool or can be used on active people (or children) for everyday activities but be hand washed when needed. The material is antimicrobial treated to reduce odor and it can be dried with a hairdryer or stood on a radiator to dry out completely afterwards.
Please note this product cannot be returned once heated and formed unless damaged. Please call the office at 800-580-9887 for any issues.
How do I fit the Exos Brace?
Open and unfold the brace.
The proper heating temperature is 90°C (a very cool oven)
Heat the brace in Exos™ oven for approximately 3-4 minutes or until the brace is pliable. The brace should not be too hot to handle comfortably.
Ensure that the skin is completely dry before application.
Fit brace on the patient.
Remove slack in lace by tightening Boa Knob. Caution: Do not tighten the brace fully until the brace has returned to room temperature otherwise indentations in plastic may occur.
Mold brace into the desired position.
Hook-and-loop fastener strap may be secured in the desired position.
Once the brace has hardened, the Boa® Knob may be tightened to desired tension. Warning: The brace should not be worn too tightly. This may produce excessive mechanical force or shear forces on the skin.
We try to get this item out of the warehouse quickly. Especially since we know you need it urgently. However, there may be a 1-2 business day delay before the item ships out of the warehouse even if you pay Next Day or 2nd Day Air. Please plan accordingly.
The Velcro that secures the brace at the thumb fell off within the first 2 minutes after molding. I would think the quality would have been better when dealing with braces that secure fractures.
T
Tyler K Bennett
Great Product
I am very pleased by the product and the customer support I got.
My son (6 years old)had a long arm put on for 1 month and it was torture especially in the august California heat. When we found out he was getting a short arm after 4 weeks I ordered this in hopes it would help him being able to breath more in the cast, and not feel so overwhelmed.
It did! He even lets me wash his hand now without crying!! We don’t fully submerge it, but we do wash around the areas with ease.
It’s been amazing.
Site looked a little sketchy to me but I took the risk and glad I did. It was here in 4-5 days and having the camo Print has been nice, he gets lots of compliments.
