Works as anticipated, good product that solves many problems.
Easy process to order efficient shipping ,good communication .
High quality knee brace.
Great service, quick delivery. Allowed me to stay in water on family summer vacation.
Description
DeSoutter 7310 Diamond Coated Circular Cast Saw Blade — 64 mm
The DeSoutter 7310 diamond coated cast saw blade is a 64 mm circular replacement blade for De Soutter CleanCast CC4, CC5, and CC6 cast saw systems. De Soutter rates this blade as an optimal choice for cutting fiberglass cast material.
This OrthoTape listing includes one replacement blade. The 7310 uses De Soutter’s easy-fit pentagon mounting hole, which allows the circular blade to be repositioned as the cutting edge wears.
Compatibility: DeSoutter CleanCast CC4, CC5, and CC6 systems. This blade is not designed for the newer CC7 or CC8 blade-mounting system.
Key Features
- Diamond coated cutting edge: Designed for efficient removal of fiberglass cast material.
- 64 mm circular blade: Approximately 2.5 inches in diameter.
- Easy-fit pentagon mounting hole: Designed for compatible De Soutter CleanCast saws.
- Five usable blade positions: The circular blade can be rotated to expose a different section of the cutting edge.
- Compatible saws: CleanCast CC4, CC5, and CC6.
- Quantity: One replacement cast saw blade.
Product Specifications
| Specification | Details |
|---|---|
| Manufacturer | De Soutter Medical |
| Blade configuration | Circular cast saw blade |
| Blade coating | Diamond coated |
| Blade diameter | 64 mm / approximately 2.5 inches |
| Mounting design | Easy-fit pentagon mounting hole |
| Compatible systems | DeSoutter CleanCast CC4, CC5, and CC6 |
| Recommended cast material | Fiberglass casting material |
| Quantity | One replacement blade |
Cast Material Suitability
De Soutter’s blade-selection chart provides the following recommendations for the 7310 diamond coated blade:
| Cast Material | Manufacturer Rating | Selection Guidance |
|---|---|---|
| Fiberglass | Optimal | The recommended application for the DeSoutter 7310 diamond coated blade. |
| Plaster of Paris | Not recommended | Select a blade coating rated for plaster cast removal. |
| Polyester casting material | Not recommended | Select a blade coating rated for polyester cast material. |
Cast-material names and formulations vary by manufacturer. Confirm the casting material before selecting a replacement blade.
Easy-Fit Pentagon Mounting System
The DeSoutter 7310 uses an easy-fit pentagon mounting hole. Because the blade is circular, it can be loosened and repositioned to expose a different section of the cutting edge. De Soutter states that its circular CleanCast blades can be rotated through as many as five positions to help maximize useful blade life.
Always disconnect the cast saw from its power source and follow the equipment manufacturer’s blade-changing procedure before removing, rotating, or replacing a blade.
When to Replace a Cast Saw Blade
A worn blade can require greater pressure, additional passes, and longer cutting time. Inspect and replace the blade when you observe:
- A noticeable decline in cutting performance
- More pressure required to move through the cast material
- More passes required than under normal operating conditions
- Visible damage, missing abrasive material, distortion, or uneven wear
- Increasing cutting time or heat during normal use
Professional-use notice: Cast saws and replacement blades should be installed and operated by trained personnel in accordance with the cast saw manufacturer’s instructions and the facility’s safety procedures.
Frequently Asked Questions
Which cast saws fit the DeSoutter 7310 blade?
The DeSoutter 7310 blade is designed for De Soutter CleanCast CC4, CC5, and CC6 cast saw systems.
What is the diameter of the DeSoutter 7310 blade?
The DeSoutter 7310 is a 64 mm circular blade, which is approximately 2.5 inches in diameter.
What cast material is the DeSoutter 7310 designed to cut?
De Soutter rates the 7310 diamond coated blade as optimal for fiberglass cast material.
Is the DeSoutter 7310 recommended for plaster or polyester casts?
No. De Soutter’s blade-selection chart rates the 7310 as not recommended for plaster of Paris or polyester cast material.
Does the DeSoutter 7310 fit the CC7 or CC8 cast saw?
No. The 7310 uses the legacy CleanCast pentagon mounting system for the CC4, CC5, and CC6. DeSoutter CC7 and CC8 systems require compatible CC7 or CC8 blades.
How many blades are included with this listing?
This OrthoTape listing includes one DeSoutter 7310 diamond coated replacement blade.
Product compatibility and cast-material recommendations are based on De Soutter Medical blade-selection information. Confirm the saw model, blade mount, blade diameter, and cast material before ordering.