2 Inch Delta Cast Prints Polyester Casting Tape 10 Rolls per Box

2 inch Delta-Cast Prints polyester casting tape by BSN Medical / Essity gives a rigid orthopedic cast a patterned finish without using fiberglass in the printed tape itself. Each roll measures 2 inches x 4 yards (5 cm x 3.6 m), and each box contains 10 rolls. Choose ten rolls of one design or the Mixed Pack with five designs, two rolls of each. A favorite print gives patients a way to personalize the cast they wear during recovery.

Also available in 3-inch width: Shop 3-inch Delta-Cast Prints Polyester Casting Tape. This page is for the 2-inch size.

💳 HSA/FSA Purchase Information

Purchasing casting supplies for medical care? Confirm HSA/FSA eligibility and any documentation requirements with your account administrator. Learn more ↓

What Is Delta-Cast Prints Used For?

🏥 Medical Applications

• Clinician-directed immobilization: casting and splinting applications selected by a trained medical professional.
• Printed cast overlays: patterned outer layers over an appropriately constructed base cast.
• Pediatric and adult cast personalization: choose camouflage, dinosaurs, galaxy, paws, sports, and other designs.
• Smaller-area wrapping: the 2-inch width supports controlled wrapping around smaller anatomy.

🎨 Decorative Applications

The printed fabric provides the decorative finish on a clinical cast. It is a resin-impregnated medical casting material, not a soft craft ribbon or plaster bandage. Handle only with appropriate protective equipment and follow the manufacturer's safety instructions.

Polyester vs Fiberglass Casting Tape

The difference starts with the fabric. Polyester casting tape uses polyester fabric; fiberglass casting tape uses glass-fiber fabric. Both are impregnated with polyurethane resin, which hardens on exposure to water or moisture in the air. Fiberglass generally provides greater strength and rigidity, while polyester fabric is softer and more conformable. Both become solid, rigid casting materials after curing.

Clinician Tip: A Strong Base with a Printed Finish

A common approach is to construct a white fiberglass base cast for strength, then apply Delta-Cast Prints polyester casting tape as a decorative outer layer. This combines the rigidity of the fiberglass base with the patterned appearance of the polyester overlay. The printed layer does not replace the required structural layers. Cast construction, layer count, and application must follow the manufacturers' instructions and the treating clinician's judgment.

Product Features

• Fiberglass-free polyester substrate with moisture-activated polyurethane resin.
• Printed designs for a personalized cast finish.
• Multidirectional conformability for anatomical molding.
• Low-tack resin to help reduce sticking to application gloves.
• Radiolucent material for X-ray assessment through the cast.
• Not made with natural rubber latex.
• Ten rolls per box, each 2 inches x 4 yards.

Product Specifications and Setting Time

Delta-Cast Prints Design and Reference Chart

Each listed roll is 4 yards long; each box contains 10 rolls. Order the 2-inch size on this page, or shop 3-inch Delta-Cast Prints on its separate product page. Match your selected design to its manufacturer reference number; see the 3-inch page for available design selections.

Mixed Pack: Ten rolls per box, with two rolls each of Blue Camouflage, Leopard, Paws, Pink Camouflage, and Sports. A dash means no 3-inch reference is supplied in this chart.

Why Buy from OrthoTape.com?

• ✅ Authorized BSN Medical Dealer
• ✅ Guaranteed Fresh Stock
• ✅ Real People, Real Support: contact sales@orthotape.com for product-selection help.
• ✅ Authentic Product Quality Guaranteed
• ✅ HSA/FSA purchase guidance: confirm eligibility for your medical purchase with your administrator.

Hospitals, Doctors and Clinics

Contact sales@orthotape.com for GPO and volume-pricing inquiries.

Waterproof Casting: Ask About OrthoH2O

OrthoTape's preferred undercast option to discuss with your clinician is OrthoH2O Waterproof Cast Stockinette Full Roll. Its product information describes use with standard fiberglass casting tape. The treating clinician must confirm suitability of the complete construction, including any printed polyester overlay, and follow the instructions for each material.

A Printed Overlay Does Not Make a Cast Waterproof

Water exposure requires an appropriate complete undercast system, correct application, and your clinician's approval. Standard absorbent padding is not waterproof. Do not swim, soak, or shower an ordinary cast because its outer tape has cured.

Related Cast Room Supplies

Browse casting supplies, cast padding, stockinette, and cast removal tools. This listing is for 2-inch rolls; order the 3-inch size on its separate product page.

Application and Handling Guidance for Clinicians

This overview is not a substitute for the manufacturer's instructions or clinical training.

1. Plan the cast: assess the patient and choose the appropriate undercast system, structural materials, and design according to clinical requirements.
2. Prepare safely: wear protective gloves and keep the moisture-sensitive foil package sealed until ready to use.
3. Activate and apply: follow the current manufacturer instructions for wetting, water temperature, wrapping, molding, and layer count. If using a printed overlay, retain the structural base required by the casting plan.
4. Allow curing and assess: follow the manufacturer's curing instructions and assess fit and circulation. Give patient-specific care and weight-bearing instructions.

Storage, Handling and Safety

For application by appropriately trained clinicians. Moisture in the air can initiate hardening, so do not open the foil packaging before use. Follow current manufacturer directions for storage, application, curing, safe weight-bearing, and removal. Do not use this page as instructions for self-casting.

Frequently Asked Questions

What is the difference between polyester and fiberglass casting tape?

The main difference is the fabric: polyester casting tape uses polyester fabric, while fiberglass casting tape uses glass-fiber fabric. Both are impregnated with polyurethane resin that hardens when exposed to water or humidity. Fiberglass generally provides greater strength and rigidity; polyester fabric is softer and more conformable. Both form solid, rigid casts after curing.

Does insurance cover casting tape? Can I use HSA or FSA funds?

Insurance reimbursement and HSA/FSA eligibility depend on your plan, the medical purpose of the purchase, and any documentation required. Confirm coverage and eligibility with your insurer or account administrator before ordering. Compare your direct-purchase cost with your provider's materials charge; savings are not guaranteed.

Is Delta-Cast Prints available in 3-inch width?

Yes. OrthoTape.com also offers 3-inch Delta-Cast Prints Polyester Casting Tape in 10-roll boxes. Order the 2-inch size on this page, or visit the separate 3-inch product page to choose from its available designs.

Can Delta-Cast Prints be applied over a white fiberglass base cast?

A common clinician-directed approach is to construct a white fiberglass base cast for strength, then use printed polyester casting tape as a decorative outer layer. The treating clinician must determine suitability, layer count, and technique according to the manufacturers' instructions. The printed layer does not replace the structural layers required for the cast.

Is Delta-Cast Prints plaster or fiberglass?

Neither. Delta-Cast Prints is fiberglass-free polyester fabric impregnated with moisture-activated polyurethane resin. It is not plaster of Paris. A cast with a fiberglass base and a Delta-Cast Prints overlay still contains fiberglass in its base layers.

How many rolls are in a box of 2 inch Delta-Cast Prints?

Each box contains ten rolls measuring 2 inches by 4 yards. Single-design boxes contain ten rolls of the selected print. Mixed Pack reference 7227360 contains two rolls each of Blue Camouflage, Leopard, Paws, Pink Camouflage, and Sports.

How long does Delta-Cast Prints take to set?

The listed setting time is 3–5 minutes, with approximately 20 minutes to weight-bearing strength when properly applied. Setting is not the same as clearance to bear weight. Follow the current manufacturer instructions and the treating clinician's weight-bearing directions.

Can patients swim with Delta-Cast Prints?

Printed outer tape alone does not make a cast waterproof. Water exposure requires a suitable complete undercast system, correct application, and approval from the treating clinician. OrthoTape's preferred undercast option to discuss with your clinician is OrthoH2O. Confirm suitability of the entire cast construction before swimming; standard absorbent padding is not waterproof.

Is Delta-Cast Prints radiolucent?

Delta-Cast Prints is radiolucent, allowing X-ray assessment through the casting material. Imaging quality also depends on the complete cast construction and imaging technique.