DeSoutter 20240 Ion Nitride Full Round Cast Saw Blade | CC7 & CC8 | 64mm | Single Blade

The DeSoutter 20240 is a 64mm full round Ion Nitride cast saw blade for the CC7 and CC8 systems. Ion Nitride is the only coating recommended for fiberglass casts — its hard treatment makes the blade exceptionally durable on abrasive cast materials. The 5-position rotatable mount extends blade life by allowing repositioning as each cutting edge wears. Single blade. For a 5-pack value option, see the DeSoutter blade collection.

Specifications

Part Number: 20240
Coating: Ion Nitride — recommended for fiberglass, plaster, and polyester casts
Blade design: Full round (circular)
Diameter: 64mm
Mount: 5-position rotatable
Compatible saws: DeSoutter CC7 CleanCast, CC8
Pack size: 1 single blade

Cast Compatibility

✅ Fiberglass (Deltalite, Scotchcast) — Ion Nitride is the only recommended coating for fiberglass
✅ Plaster of Paris (Gypsona)
✅ Polyester (Deltalite, Benacast, Cellacast)

Shipping: Ships from NJ or CA warehouse in 2–3 business days.

OrthoTape.com is an authorized DeSoutter dealer. Genuine DeSoutter replacement blade.

Browse All DeSoutter CC7/CC8 Blades

Shop DeSoutter Blades

89%

(2281)

(209)

(49)

(9)

(13)

821

Exos Splints

Great quality superb price and Delivery by UPS and great online shop.

This is a top of the line boot

This is a top of the line boot. I have used another brand given to me by my doctors office that that had a lip on the outside not padded which created skin breakdown on the out side of my foot. The form fit design does not have a lip and has more rubber padding at the sides than the competitor. I showed the difference in engineering design to my doctor and highly recommended the form fit boot. Please
Note they were the same price.

Could be improved...

So, I finally got the opportunity to use the casting tape today. I want to preface this by saying I'm not a professional caster.

The tape seemed to dry out a bit too fast (it was a bit of a hot day, but I used cold tap water. As a result, the layers didn't seem to mold together very well. However, that may have more to do with MY lack of experience.

The one complaint is that the hot pink had some light (almost white) spots in the roll, and a strange waffle pattern in the ends of the rolls.

Hi Alan, thanks for sharing your experience. The white spots are caused by the dry gloves touching the casting tape. Usually when I do a final layer, I do not touch the tape at all except for the sides, so I get the perfect color finish. As for the honeycomb at the end. In our next batch we are changing that center so it does not do that. Usally I cut it off with scissors before that. As for drying out, that has to do with how fast you are at casting. Since you said you were new at it, that can happen as you have to work quickly with the tape before it hardens. You will get better with more practice. Also make sure your bucket is a new bucket, a household cleaning bucket can have cleaning residue which can cause issue with the polyurethane resin.

Fit

Fit perfect

Pediatric Lifesaver

I have used in the past and it is great! Best advice is that it stretches more so get a size smaller than you think. But it’s a lifesaver in pediatrics!!

Hi Ericca, thank you for your wonderful feedback! If you like Delta Dry, try our OrthoH2O we are happy to send some samples to you. It is a much easier one piece application. It does not tear easy like Delta Dry and it is much more cost effective. See it here or search OrthoH2O on our site: https://orthotape.com/collections/orthoh2o-waterproof-cast

1 2 3

DeSoutter 20240 Ion Nitride Round Cast Saw Blade | CC7, CC8 | 64mm | Single Blade

Description

DeSoutter 20240 Ion Nitride Full Round Cast Saw Blade | CC7 & CC8 | 64mm | Single Blade

Specifications

Cast Compatibility

Browse All DeSoutter CC7/CC8 Blades

DeSoutter 20240 Ion Nitride Round Cast Saw Blade | CC7, CC8 | 64mm | Single Blade

You may also like

Recently viewed

Let customers speak for us